Get in touch with
a
representative online
Or Contact Us At:
Phone:
(804) 706-1801
Fax:
(804) 706-1802
E-mail:
info@technicalsurface.com
Locations:
1800 Coyote Drive, Suite B
P. O. Box 3045
Chester, VA 23836
116 Canal Street, Suite A
New Smyrna Beach, FL 32168
Serving all of North America
A division of:
Warthan Associates, Inc
E-mail:
wa@warthan.com
www.warthan.com
Frequently Asked Questions
Why TechLoc Technical Surfaces Interlocking Floor Tiles?
Because TechLoc offers the best value for money of any flooring product currently on the market.
To justify our claim we ask you to consider the following points:
- Techloc Interlocking Floor Tiles are 7mm + thick compared to most vinyl or resin based systems that are 1.5mm thick; meaning that you are getting a far more durable and resilient floor finish for your money.
Unlike other flooring TechLoc doesn’t require any specialist skills to install, and can be laid over damaged, damp or uneven surfaces. It is not usually glued down, saving money on specialist contractors, adhesives and floor screeds. - TechLoc can be used immediately. Consider the cost of shutting down your commercial or industrial facility, or interrupting your normal site activities for floor installaltion. TechLoc tiles pay for themselves by allowing you to stay open and productive.
- Unlike conventional flooring products, TechLoc can be considered to be a capital asset for both tax and also practical purposes. As a loose laid system, TechLoc can be written down in your accounts as an asset rather than a building improvement, which is far more tax efficient. Because these technical and commercial tiles are an asset, many finance companies are willing to offer asset finance to buy the floor. Please contact our sales team for further information. Lastly, and possibly most importantly, TechLoc can be lifted, altered and reused as many times as required. Move factory or home and you can take the tiles with you. Even if you choose not to install the tiles in your new premises, the tiles retain a high intrinsic value because there is a strong market for both second hand tiles and also for the raw material for recycling.
- Floor protection; not only are you creating a smart, attractive and practical floor finish but you are also protecting the sub-floor from impact and vibration damage. A number of our customers - and especially those that occupy premises on short leases - will use TechLoc tiles to protect the commercial or industrial floor and limit their exposure to large bills from the landlord for dilapidation. Why pay for a new floor on three separate occasions - when you move in, when you move out, and when you move to new premises - since a TechLoc floor will cover you for all three!
Additional technical surface solutions information is just a click away!
Contact a technical surfaces representative today >>
Where can I use TechLoc technical and commercial floor tiles?
The TechLoc interlocking tile range has been designed to offer solutions for almost every conceivable technical and commercial flooring application, from factory floors to kids' playrooms. Please consult with one of our sales team who can help point you towards which interlocking tile product would be most suitable for your application.
Do I need to carry out repairs to the substrate before installing the tiles?
No, except for major cracks or missing cement pieces, no skim coating, sealing, sand blasting or detergent washing is necessary. Just sweep or vacuum the floor to make sure that there are no loose items that will get stuck under the tiles and you’re ready to start installation.
Does the floor need to be dry / Do I need to degrease the substrate?
No, one of the main benefits of the Techloc system is that it can be laid on damp and contaminated substrates. The tiles allow the floor to breathe so any moisture will evaporate up through the joints. Because the technical and commercial tiles are not glued down oil contamination will not create a problem.
Will water get underneath the tiles and start to smell?
Probably the question we get asked most often. The answer is NO. We recommend TechLoc to customers who live in areas that are prone to flooding, as water getting under the tiles doesn't cause a problem and eliminates the need to replace flood damaged floor coverings. The precision engineered TechLoc joint is extremely tight but we do not claim that it is 100% waterproof. If large amounts of water are left to sit on the floor it is possible that some will seep through the joint. The most common concern people have is that the water will become stagnant and start to smell but this will not happen. Firstly the chemicals in the PVC tile act as a natural biocide that prevents the growth of the bacteria that would make the water smell and secondly any moisture under the tiles will evaporate back up through the joint because the temperature above the tiles is almost certain to be higher than that under the tiles.
How do I clean the interlocking tiles?
Please refer to our installation and maintenance instructions for a more in depth guide to cleaning but in general terms we recommend that firstly you sweep or vacuum up dust and dirt and then damp (not wet) mop the tiles. Water by itself or with a small quantity of detergent will suffice with either a mop or a rotary scrubber dryer if available. No waxes or sealers should be used. You can use a buffer with a lambs wool pad to buff a clean dry floor to an amazing shine.
Can I use a fork lift / floor jack / heavy machinery on TechLoc industrial or commercial flooring?
TechLoc is extremely tough and hardwearing. It is a vinyl product so it will compress under heavy loads but will always return to its original shape. Please consult our sales team to identify which product would be most suitable for your application.
Do I need to use an adhesive with an TechLoc floor?
In the vast majority of applications no adhesive is required; the tiles can be dry laid and will take forklift or vehicle traffic without a problem. The only instances in which the tiles may require gluing is when there is a fork truck with a very high point loading (for example a three wheel electric reach truck with the batteries located over the back wheel) that operates in a confined space with very tight turning circles, or, when part of the floor is likely to be exposed to much higher temperatures than the rest of the floor (e.g. in front of a furnace or oven or adjacent to a south facing loading bay door). Please consult with someone from our sales team to determine if you will require adhesive for you floor.
Can I use my TechLoc floor straight away?
Yes, absolutely. The minute the interlocking tiles are down you can start using the floor.
Can Techloc be installed over a painted / vinyl / carpeted floor?
Yes to the first two, but we recommend removing carpet if possible.
Do the tiles require a sealant?
No, however the application of 2 to 3 three coats of a floor sealer will give the floor a high gloss appearance and make cleaning slightly easier in the long term.
What tools are required to install TechLoc?
A rubber mallet to connect the interlocking tile joints and a Stanley knife with a concave blade are the bare essentials required. If available, a table saw will make cutting the tiles easier. An electric jigsaw or bandsaw can also be used. A wood blade will work best.
Can I use these tiles outside?
Yes. The wet area flooring Checkerplate Leisure is best suited for outdoor use. Adhesive may be required for certain applications.
What is TechLoc interlocking tile made from?
Up to 50% recycled material that would otherwise be destined for our landfills. Recycled does not mean lower quality, the vast majority of waste material we reprocess comes from the pharmaceutical industry and is of such a high quality that it would not be commercially viable for tile manufacture unless it was recycled. Environmentally friendly TechLoc makes good use of what we would normally throw away.
Additional information is just a click away. Contact a representative today >>
